EQO building material testing (CMA qualification capability) - (Table 1) |
Serial number | Metrological authentication Testing items | Testing items or parameters |
Serial number | Name / parameter | Standard / standard terms |
One | Waterproofing membrane | One | Elastomer modified asphalt waterproofing membrane | Elastomer modified asphalt waterproofing membrane GB 18242-2008 |
Two | Plastic modified asphalt waterproofing membrane | Plastic modified asphalt waterproofing membrane GB 18243-2008 |
Three | Self adhered polymer modified asphalt waterproofing membrane | Self adhered polymer modified asphalt waterproofing membrane GB 23441-2009 |
Four | Waterproofing roll roofing | Waterproofing roll roofing GB/T 23457-2017 |
Five | Polymer waterproof material | Polymer waterproof material first parts sheet GB/T 18173.1-2012 |
Six | PVC waterproofing membrane | PVC waterproofing membrane GB 12952-2011 |
Seven | Thermoplastic polyolefin waterproofing material | Thermoplastic polyolefin waterproofing material GB 27789-2011 |
Two | Waterproof coating | Eight | Polyurethane waterproof coating | Polyurethane waterproof coating GB/T 19250-2013 |
Nine | Polymer cement waterproof coating | Polymer cement waterproof coating GB/T 23445-2009 |
Three | Wall materials | Ten | Fired common bricks | Fired common bricks GB/T 5101-2017 |
Eleven | Autoclaved aerated concrete blocks | Autoclaved aerated concrete blocks GB/T 11968-2006 |
Twelve | autoclaved sand-lime brick | autoclaved sand-lime brick GB/T 11945-1999 |
Thirteen | Load-bearing concrete perforated brick | Load-bearing concrete perforated brick GB/T 25779-2010 |
Fourteen | Non bearing concrete hollow brick | Non bearing concrete hollow brick GBT 24492-2009 |
Fifteen | Ordinary concrete small block | Ordinary concrete small block GB/T 8239-2014 |
Sixteen | Autoclaved lime sand perforated brick | Autoclaved lime sand perforated brick JC/T 637-2009 |
Seventeen | Fly ash concrete small hollow block | Fly ash concrete small hollow block JC/T 862-2008 |
Eighteen | Concrete tile | Concrete tile JC/T 746-2007 |
Nineteen | Fired perforated brick and porous block | Fired perforated brick and porous block GB/T 13544-2011 |
Twenty | Fired hollow brick and hollow block | Fired hollow brick and hollow block GB/T 13545-2014 |
Four | doors and windows | Twenty-one | Plastic windows for buildings | Plastic windows for buildings GB/T 28887-2012 |
Twenty-two | Aluminum alloy doors and windows | Aluminum alloy doors and windows GB/T 8478-2008 |
Decoration materials |
Five | Sealant | One | Silicone sealant for building use | Silicone sealant for building use GB 16776-2005 |
Two | Silicone sealants and modified silicone sealants | Silicone sealants and modified silicone sealants GB/T 14683-2017 |
Three | Building sealant for stone | Building sealant for stone GB/T 23261-2009 |
Four | Silicone sealant for insulating glass | Silicone sealant for insulating glass GB 24266-2009 |
Six | Sealant | Five | Elastic sealant for building windows | Elastic sealant for building windows JC/T 485-2007 |
Seven | Architectural coatings and putty | Six | Heavy calcium carbonate for coating industry | Heavy calcium carbonate for coating industry HG/T 3249.2-2013 |
Seven | Primers for interior and exterior walls of buildings | Primers for interior and exterior walls of buildings JG/T 210-2007 |
Eight | Synthetic resin emulsion sand wall architectural coatings | Synthetic resin emulsion sand wall architectural coatings JG/T 24-2000 |
Synthetic resin emulsion sand wall architectural coatings JG/T 24-2018 |
Nine | Elastic architectural coatings | Elastic architectural coatings JG/T 172-2014 |
Ten | Putty for building interior wall | Putty for building interior wall JG/T 298-2010 |
Eleven | Putty for building exterior wall | Putty for building exterior wall JG/T 157-2009 |
Twelve | Synthetic resin emulsion interior wall coatings | Synthetic resin emulsion interior wall coatings GB/T 9756-2018 |
Thirteen | exterior coating | exterior coating GB/T 9757-2001 |
Fourteen | Synthetic resin emulsion exterior wall coatings | Synthetic resin emulsion exterior wall coatings GB/T 9755-2014 |
Fifteen | Flexible putty for exterior wall | Flexible putty for exterior wall GB/T 23455-2009 |
Eight | Wood floor | Sixteen | Solid wood flooring | Technical requirements for first parts of solid wood flooring GB/T 15036.1-2018 |
Second methods for testing solid wood flooring GB/T 15036.2-2018 |
Seventeen | Solid wood composite floor | Solid wood composite floor GB/T 18103-2013 |
Nine | adhesive | Eighteen | Ceramic tile adhesive | Ceramic tile adhesive JC / T 547-2017 |
Metallic materials |
Ten | Metallic materials | Nineteen | First parts of reinforced concrete steel: hot-rolled round bars | First parts of reinforced concrete steel: hot-rolled round bars GB/T 1499.1-2017 |
Eleven | Metallic materials | Twenty | Second parts of reinforced concrete steel: hot-rolled ribbed bar | Second parts of reinforced concrete steel: hot-rolled ribbed bar GB/T 1499.2-2018 |
Twenty-one | High quality carbon structural steel | High quality carbon structural steel GB/T 699-2015 |
Twenty-two | Carbon structural steel | Carbon structural steel GB/T 700-2006 |
Twenty-three | Rebar for prestressed concrete | Rebar for prestressed concrete GB/T 20065-2016 |
Twenty-four | Low alloy high strength structural steel | Low alloy high strength structural steel GB/T 1591-2018 |
Twenty-five | Aluminium alloy building profiles first part: base material | Aluminium alloy building profiles first part: base material GB/T 5237.1-2017 |
Twenty-six | Aluminium alloy building profiles second part: anodized section | Aluminium alloy building profiles second part: anodized section GB/T 5237.2-2017 |
Twelve | Metallic materials | Twenty-seven | Welded pipes for low pressure fluid delivery | Welded pipes for low pressure fluid delivery GB/T 3091-2015 |
Waterproof material |
Thirteen | Building waterproofing membrane | Twenty-eight | Appearance | Test methods for building waterproofing membrane second part: appearance of asphalt waterproofing membrane GB/T 328.2-2007 |
Twenty-nine | Test methods for building waterproofing membrane third part: appearance of polymer waterproofing membrane GB/T 328.3-2007 |
Thirty | Thickness, unit area mass | Test methods for building waterproofing membrane fourth part: thickness of asphalt waterproofing membrane, quality of unit area GB/T 328.4-2007 |
Thirty-one | Test methods for building waterproofing membrane fifth part: thickness of polymer waterproofing membrane and quality per unit area GB/T 328.5-2007 |
Thirty-two | Length, width, flatness, flatness | Test methods for building waterproofing membrane sixth part of asphalt waterproofing membrane length, width and straightness GB/T 328.6-2007 |
Thirty-three | Test methods for building waterproofing membrane seventh part of polymer waterproofing membrane length, width and straightness GB/T 328.7-2007 |
Fourteen | Building waterproofing membrane | Thirty-four | tensile property | Test methods for building waterproofing membrane eighth part tensile properties of asphalt waterproofing membrane GB/T 328.8-2007 |
Thirty-five | Test methods for building waterproofing membrane ninth part tensile properties of polymer waterproofing membrane GB/T 328.9-2007 |
Thirty-six | Water impermeability | Test methods for building waterproofing membrane tenth part: waterproofing properties of asphalt and polymer waterproofing membrane GB/T 328.10-2007 |
Thirty-seven | Heat resistance | Test methods for building waterproofing membrane eleventh part: heat resistance of asphalt waterproofing membrane GB/T 328.11-2007 |
Thirty-eight | dimensional stability | Test methods for building waterproofing membrane twelfth part dimensional stability of asphalt waterproofing membrane GB/T 328.12-2007 |
| Test methods for building waterproofing membrane thirteenth part dimensional stability of polymer waterproofing membrane GB/T 328.13-2007 |
Forty | Low temperature flexibility | Test methods for building waterproofing membrane fourteenth part: low temperature flexibility of asphalt waterproofing membrane GB/T 328.14-2007 |
Forty-one | Low temperature bending property | Test methods for building waterproofing membrane fifteenth part: low temperature bending property of polymer waterproofing membrane GB/T 328.15-2007 |
Forty-two | Chemical resistant liquid | Test methods for building waterproofing membrane sixteenth part of polymer waterproofing membrane resistant to chemical fluid (including water) GB/T 328.16-2007 |
Forty-three | Tear resistance | Test methods for building waterproofing membrane eighteenth part tear properties of asphalt waterproofing membrane (nail bar method) GB/T 328.18-2007 |
Forty-four | Test methods for building waterproofing membrane nineteenth part tear property of polymer waterproofing membrane GB/T 328.19-2007 |
Forty-five | Joint peeling property | Test methods for building waterproofing membrane twentieth part peeling performance of asphalt waterproofing membrane GB/T 328.20-2007 |
| Test methods for building waterproofing membrane twenty-first part of polymer waterproofing membrane joint peel property GB/T 328.21-2007 |
Forty-seven | Joint shear properties | Test methods for building waterproofing membrane part twenty-second: shear properties of asphalt waterproofing membrane joints GB/T 328.22-2007 |
| Test methods for building waterproofing membrane twenty-third part of polymer waterproofing membrane joint shear properties GB/T 328.23-2007 |
Fifteen | Building waterproofing membrane | Forty-nine | Impact resistance | Test methods for building waterproofing membrane twenty-fourth part: impact resistance of asphalt and polymer waterproofing membrane GB/T 328.24-2007 |
Fifty | Anti static load | Test methods for building waterproofing membrane twenty-fifth part of asphalt and polymer waterproofing membrane static load resistance GB/T 328.25-2007 |
Fifty-one | Soluble matter content | Test methods for building waterproofing membrane twenty-sixth part of asphalt waterproofing membrane soluble content (dip coating material content) GB/T 328.26-2007 |
Fifty-two | Water absorbency | Test methods for building waterproofing membrane twenty-seventh part: water absorption of asphalt and polymer waterproofing membrane GB/T 328.27-2007 |
Fifty-three | Thermal aging | Test method for ageing of building waterproof materials GB/T 18244-2000 |
Sixteen | Vulcanized rubber and thermoplastic rubber | Fifty-four | Tensile stress-strain properties | Determination of tensile stress and strain properties of vulcanized rubber or thermoplastic rubber GB/T 528-2009 |
Fifty-five | tear strength | Determination of tear strength of vulcanized rubber or thermoplastic rubber (Trouser, rectangular and crescent) GB/T 529-2008 |
Fifty-six | hardness | Test method for press in hardness of vulcanized rubber or thermoplastic rubber part first part of Shaw hardness tester (Shahr hardness) GB/T 531.1-2008 |
Fifty-seven | Liquid resistance test | Test method for liquid resistance of vulcanized rubber or thermoplastic rubber GB/T 1690-2010 |
Fifty-eight | Hot air aging | Hot air accelerated aging and heat resistance test of vulcanized rubber or thermoplastic rubber GB/T 3512-2014 |
Fifty-nine | Artificial weathering | Weatherability of vulcanized rubber or thermoplastic rubber GB/T 3511-2018 |
Seventeen | Building waterproof coating | Sixty | Solid content | Test method for building waterproof coating GB/T 16777-2008 |
Sixty-one | Bond strength | Test method for building waterproof coating GB/T 16777-2008 |
Sixty-two | tensile strength | Test method for building waterproof coating GB/T 16777-2008 |
Sixty-three | Heating expansion ratio | Test method for building waterproof coating GB/T 16777-2008 |
Sixty-four | Low temperature flexibility | Test method for building waterproof coating GB/T 16777-2008 |
Sixty-five | Low temperature bending property | Test method for building waterproof coating GB/T 16777-2008 |
Sixty-six | Water impermeability | Test method for building waterproof coating GB/T 16777-2008 |
Sixty-seven | drying time | Test method for building waterproof coating GB/T 16777-2008 |
Eighteen | Building material | Sixty-eight | Radionuclide limit | Limit of radionuclides in building materials GB 6566-2010 |
Sixty-nine | Artificial weathering | Accelerated weathering test for artificial weathering of building materials GB/T 16259-2008 |
masonry material |
Nineteen | Concrete blocks and bricks | Seventy | Dimensional deviation and appearance quality | Test methods for concrete blocks and bricks GB/T 4111-2013 |
Seventy-one | compressive strength | Test methods for concrete blocks and bricks GB/T 4111-2013 |
Seventy-two | Flexural strength | Test methods for concrete blocks and bricks GB/T 4111-2013 |
Seventy-three | Bulk density and void fraction | Test methods for concrete blocks and bricks GB/T 4111-2013 |
Seventy-four | Water content, water absorption and relative moisture content | Test methods for concrete blocks and bricks GB/T 4111-2013 |
Seventy-five | Drying shrinkage value | Test methods for concrete blocks and bricks GB/T 4111-2013 |
Seventy-six | Softening coefficient | Test methods for concrete blocks and bricks GB/T 4111-2013 |
Seventy-seven | Carbonization coefficient | Test methods for concrete blocks and bricks GB/T 4111-2013 |
Seventy-eight | Frost resistance | Test methods for concrete blocks and bricks GB/T 4111-2013 |
Seventy-nine | Impermeability | Test methods for concrete blocks and bricks GB/T 4111-2013 |
Twenty | Brick masonry | Eighty | Dimension measurement | Test methods for masonry tiles GB/T 2542-2012 |
Eighty-one | Appearance quality inspection | Test methods for masonry tiles GB/T 2542-2012 |
Eighty-two | Flexural strength test | Test methods for masonry tiles GB/T 2542-2012 |
Eighty-three | Compressive strength test | Test methods for masonry tiles GB/T 2542-2012 |
Eighty-four | Freeze-thaw test | Test methods for masonry tiles GB/T 2542-2012 |
Eighty-five | Bulk density test | Test methods for masonry tiles GB/T 2542-2012 |
Eighty-six | Lime burst test | Test methods for masonry tiles GB/T 2542-2012 |
Eighty-seven | Frost test | Test methods for masonry tiles GB/T 2542-2012 |
Eighty-eight | Water absorption and saturation coefficient test | Test methods for masonry tiles GB/T 2542-2012 |
Eighty-nine | Determination of void ratio and pore structure | Test methods for masonry tiles GB/T 2542-2012 |
Twenty-one | Brick masonry | Ninety | Drying shrinkage test | Test methods for masonry tiles GB/T 2542-2012 |
Ninety-one | Carbonization test | Test methods for masonry tiles GB/T 2542-2012 |
Ninety-two | Softening test | Test methods for masonry tiles GB/T 2542-2012 |
Twenty-two | Autoclaved aerated concrete | Ninety-three | Dry density, moisture content and water absorption | Test method for performance of autoclaved aerated concrete GB/T 11969-2008 |
Ninety-four | mechanical property | Test method for performance of autoclaved aerated concrete GB/T 11969-2008 |
Ninety-five | Drying shrinkage | Test method for performance of autoclaved aerated concrete GB/T 11969-2008 |
Ninety-six | Frost resistance | Test method for performance of autoclaved aerated concrete GB/T 11969-2008 |
Ninety-seven | carbonization | Test method for performance of autoclaved aerated concrete GB/T 11969-2008 |
Ninety-eight | Drying and wetting cycle | Test method for performance of autoclaved aerated concrete GB/T 11969-2008 |
sealing material |
Twenty-three | Building sealing material | Ninety-nine | density | Test methods for building sealant second part determination of density GB/T 13477.2-2002 |
One hundred | Extrusion property | Test methods for building sealant third part of the use of standard apparatus for determining the extrusion properties of sealing materials GB/T 13477.3-2017 |
| Test methods for building sealant fourth part: Determination of extrudability of original packaging single component sealing material GB/T 13477.4-2017 |
One hundred and two | Surface dry time | Test methods for building sealant fifth part determination of dry time GB/T 13477.5-2002 |
One hundred and three | Sag and leveling | Test methods for building sealant sixth part determination of fluidity GB/T 13477.6-2002 |
One hundred and four | Low temperature flexibility | Test methods for building sealant seventh part determination of low temperature flexibility GB/T 13477.7-2002 |
One hundred and five | Tensile bond property | Test methods for building sealant eighth part determination of tensile cohesiveness GB/T 13477.8-2017 |
One hundred and six | Tensile bond property after immersion | Test methods for building sealant ninth part determination of tensile cohesiveness after immersion GB/T 13477.9-2017 |
One hundred and seven | Adhesion of elongation and elongation | Test methods for building sealant tenth part determination of adhesion of elongation and elongation GB/T 13477.10-2017 |
Twenty-four | Building sealing material | One hundred and eight | Elongation and caking property after immersion | Test methods for building sealant eleventh part determination of adhesion after immersion GB/T 13477.11-2017 |
One hundred and nine | Caking after tension and compression cycles | Test methods for building sealant twelfth part determination of cohesiveness after tension compression cycle at the same temperature. GB/T 13477.12-2017 |
One hundred and ten | Cold drawing - post hot bonding | Test methods for building sealant thirteenth part determination of adhesion after cold drawing - hot pressing GB/T 13477.13-2002 |
One hundred and eleven | Caking property after immersion and tension and compression cycles | Test methods for building sealant fourteenth part determination of caking after immersion and tension compression cycles GB/T 13477.14-2002 |
One hundred and twelve | Compression characteristics | Test methods for building sealant sixteenth part determination of compression characteristics GB/T 13477.16-2002 |
One hundred and thirteen | Elastic recovery rate | Test methods for building sealant seventeenth part determination of elastic recovery rate GB/T 13477.17-2017 |
One hundred and fourteen | Stripping caking property | Test methods for building sealant eighteenth part determination of peel adhesion GB/T 13477.18-2002 |
One hundred and fifteen | Mass and volume change | Test methods for building sealant nineteenth part: Determination of mass and volume change GB/T 13477.19-2017 |
One hundred and sixteen | Pollution | Test methods for building sealant twentieth part determination of contamination GB/T 13477.20-2017 |
Coatings / putty |
Twenty-five | Architectural coatings and putty | One hundred and seventeen | fineness | Laser diffraction method for particle size analysis GB/T 19077-2016 |
One hundred and eighteen | drying time | Determination of drying time of paint film and putty film GB/T 1728-1979 |
One hundred and nineteen | Water resistance | Determination of water resistance of paint film GB/T 1733-1993 |
One hundred and twenty | flexibility | Determination of flexibility of putty film GB/T 1748-1979 |
One hundred and twenty-one | Flexibility test method GB/T 1731-1993 |
One hundred and twenty-two | Weathering resistance | Paints and varnishes, artificial weathering and exposure to xenon arc radiation filtered by artificial radiation GB/T 1865-2009 |
One hundred and twenty-three | Contrast ratio (white or light) | Determination of contrast ratio of white and light coloured paints GB/T 23981-2009 |
One hundred and twenty-four | density | Determination of density of paints and varnishes GB/T 6750-2007 |
Twenty-six | Architectural coatings and putty | One hundred and twenty-five | Alkali resistance | Determination of alkali resistance of coating for building coatings GB/T 9265-2009 |
One hundred and twenty-six | Washability | Determination of scouring resistance of coating for building coatings GB/T 9266-2009 |
One hundred and twenty-seven | Low temperature stability | Determination of freeze-thaw resistance of latex paints GB/T 9268-2008 |
One hundred and twenty-eight | Temperature resistance of coating | Determination of freezing thawing resistance of coating for building coatings JG/T 25-2017 |
One hundred and twenty-nine | Stain resistance of coatings | Test method for stain resistance of building coating GB/T 9780-2013 |
One hundred and thirty | viscosity | Determination of viscosity of paints GB/T1723-1993 |
One hundred and thirty-one | Visual colorimetric | Paints and varnishes -- visual coloring of paints GB/T 9761-2008 |
One hundred and thirty-two | Impact resistance | Determination of impact resistance of film GB/T 1732-1993 |
One hundred and thirty-three | Swing bar damping | Swing bar damping test for paints and varnishes GB/T 1730-2007 |
One hundred and thirty-four | adhesion | Determination of adhesion of paint film GB/T 1720-1979 (1989) |
One hundred and thirty-five | Cupping test | Cupping test of paints and varnishes GB/T 9753-2007 |
One hundred and thirty-six | Mirror gloss | Paints and varnishes. Determination of mirror gloss at 20 degrees 60 degrees and 85 degrees for paints without metallic pigments GB/T 9754-2007 |
One hundred and thirty-seven | Damp heat resistance | Determination of moisture and heat resistance of paint film GB/T1740-2007 |
One hundred and thirty-eight | Neutral salt spray resistance | Determination of neutral salt spray resistance of paints and varnishes GB/T1771-2007 |
One hundred and thirty-nine | nonvolatile content | Paints, varnishes and plastics determination of non volatile matter content GB/T 1725-2007 |
One hundred and forty | Liquid resistant medium | Paints and varnishes - Determination of liquid resistance GB/T 9274-1988 |
One hundred and forty-one | fineness | Determination of fineness of paints GB/T 1724-1979 (1989) |
One hundred and forty-two | Covering power | Determination of coating covering power GB/T1726-1979 (1989) |
One hundred and forty-three | Heat resistance | Paints and varnishes - Determination of heat resistance GB/T 1735-2009 |
One hundred and forty-four | Bending test (cylinder shaft) | Flexural Tests of paints and varnishes (cylindrical shafts) GB/T 6742-2007 |
One hundred and forty-five | Scratch resistance | Determination of scratch resistance of paints and varnishes: first part: load invariability method GB/T 9279.1-2015 |
One hundred and forty-six | Grid test | Scratch test of paints and varnishes GB/T 9286-1998 |
One hundred and forty-seven | Wear resistance | Determination of abrasion resistance of paints and varnishes - rotating rubber wheel method GB/T 1768-2006 |
Sheet metal doors and windows |
Twenty-seven | Wood-based panels and veneer panels | One hundred and forty-eight | Determination of moisture content | Test method for physical and chemical properties of wood-based panels and decorative wood-based panels GB/T 17657-2013/GB/T 17657-1999 |
One hundred and forty-nine | Determination of static bending strength and modulus of elasticity | Test method for physical and chemical properties of wood-based panels and decorative wood-based panels GB/T 17657-2013/GB/T 17657-1999 |
One hundred and fifty | Dip stripping property | Test method for physical and chemical properties of wood-based panels and decorative wood-based panels GB/T 17657-2013 |
One hundred and fifty-one | Surface contamination resistance | Test method for physical and chemical properties of wood-based panels and decorative wood-based panels GB/T 17657-2013/GB/T 17657-1999 |
One hundred and fifty-two | Surface wear resistance | Test method for physical and chemical properties of wood-based panels and decorative wood-based panels GB/T 17657-2013 |
One hundred and fifty-three | Adhesion of paint film | Test of physical and chemical properties of furniture surface film fourth part: adhesion cross cutting method GB/T 4893.4-2013 |
One hundred and fifty-four | Test of physical and chemical properties of furniture surface film fourth part: adhesion cross cutting method GB/T 4893.4-1985 |
One hundred and fifty-five | Film Hardness | Paints and varnishes pencil method for determination of film hardness GB/T 6739-2006 |
Twenty-eight | Metallic materials | One hundred and fifty-six | Tensile test | Metallic materials tensile test first parts: room temperature test method GB/T 228.1-2010 |
One hundred and fifty-seven | Bending test of metallic materials | Bending test methods for metallic materials GB/T 232-2010 |
One hundred and fifty-eight | Bending test of metal tube | Bending test method for metal tube GB/T 244-2008 |
One hundred and fifty-nine | Tensile test, reverse bending test, weight deviation | Test methods of steel for reinforced concrete GB/T 28900-2012 |
One hundred and sixty | Steel bar bending test | Test methods of steel for reinforced concrete GB/T 28900-2012 |
One hundred and sixty-one | Charpy pendulum impact | Metallic materials Charpy pendulum impact test method GB/T 229-2007 |
Twenty-nine | Metallic materials | One hundred and sixty-two | Rockwell hardness | Metallic materials Rockwell hardness test first part: Test Method GB/T 230.1-2018 |
One hundred and sixty-three | Cloth hardness | First test methods for Brinell hardness test of metallic materials GB/T 231.1-2018 |
One hundred and sixty-four | Vickers hardness | Metallic materials Vivtorinox hardness test first part: Test Method GB/T 4340.1-2009 |
One hundred and sixty-five | Wechsler hardness | Test method for Wechsler hardness of aluminium alloy YS/T 420-2000 |
One hundred and sixty-six | Film thickness | Eddy current method for thickness measurement of non conductive covering layer on non-magnetic base metal GB/T 4957-2003 |
One hundred and sixty-seven | Salt spray test | Third methods for the detection of anodic oxide film on aluminum and aluminum alloys: Copper accelerated acetic acid salt spray test (CASS test) GB/T 12967.3-2008 |
One hundred and sixty-eight | Average grain size of metals | Method for measuring average grain size of metals GB/T 6394-2017 |
One hundred and sixty-nine | Flattening test | Test method for tube flatting of metallic materials GB/T 246-2017 |
One hundred and seventy | Quality of zinc coating | Test method for quality of galvanized steel products GB/T 1839-2008 |
Thirty | A fastening | One hundred and seventy-one | Torque test | Mechanical properties of fasteners bolts and screws torque test and failure torque nominal diameter 1 ~ 10mm GB/T 3098.13-1996 |
Thirty-one | Aluminium alloy building profiles | One hundred and seventy-two | Tensile test | Specimen and method for tensile test of wrought aluminium, magnesium and its alloy products GB/T 16865-2013 |
One hundred and seventy-three | chromatic aberration | Sixth methods for testing anodic oxidation film on aluminium and aluminium alloys: visual inspection method to test chromatic aberration and appearance quality of colored anodized film GB/T 12967.6-2008 |
One hundred and seventy-four | Sealing quality | Evaluation method for sealing quality of anodizing oxide film on aluminium and aluminium alloy part first: acid etching weightlessness method GB/T 8753.1-2017 |
Thirty-two | Welded joint of steel bar | One hundred and seventy-five | tensile strength | Standard for test methods of welded joints of steel bars JGJ/T 27-2014 |
One hundred and seventy-six | Bending test | Standard for test methods of welded joints of steel bars JGJ/T 27-2014 |
One hundred and seventy-seven | shear test | Standard for test methods of welded joints of steel bars JGJ/T 27-2014 |
One hundred and seventy-eight | impact test | Standard for test methods of welded joints of steel bars JGJ/T 27-2014 |
One hundred and seventy-nine | Metallographic test | Standard for test methods of welded joints of steel bars JGJ/T 27-2014 |
One hundred and eighty | hardness test | Standard for test methods of welded joints of steel bars JGJ/T 27-2014 |
One hundred and eighty-one | Grain size measurement | Standard for test methods of welded joints of steel bars JGJ/T 27-2014 |
Thirty-three | Building windows and doors | One hundred and eighty-two | Tightness performance | Classification and testing method of air tightness, watertightness and wind resistance of exterior doors and windows of buildings GB/T 7106-2008 |
One hundred and eighty-three | Watertight performance | Classification and testing method of air tightness, watertightness and wind resistance of exterior doors and windows of buildings GB/T 7106-2008 |
One hundred and eighty-four | Wind resistance performance | Classification and testing method of air tightness, watertightness and wind resistance of exterior doors and windows of buildings GB/T 7106-2008 |
One hundred and eighty-five | Thermal insulation performance | Classification and testing method of thermal insulation performance of exterior doors and windows GB/T 8484-2008 |
One hundred and eighty-six | mechanical property | Test method for mechanical properties and weathering resistance of non plasticized polyvinyl chloride (PVC-U) plastic doors and windows GB/T 11793-2008 |
One hundred and eighty-seven | Opening and closing force | Testing method for mechanical force of building windows GB/T 9158-2015/GB/T 9158-2088 |
Test method for opening and closing force of doors GB/T 29555-2013 |
Test method for opening and closing force of windows GB/T 29048-2012 |
One hundred and ninety | Repeated opening and closing | Durability test method of door and window repeated opening and closing GB/T 29739-2013 |
Inspection method for repeated opening and closing of building doors and windows JG/T 202-2006
|