The new EU baby stroller EN1888-1/-2:2018 will come into effect in June 2019. This article collects some updates on the new standards and facilitates the export of EU production companies to make technical reserves. At the same time, the implementation of the new EU standards has certain demonstration effects on the technical requirements of similar products in other countries, and related enterprises can learn from them in advance.

Compared with EN1888:2012, the new standard increases the classification requirements for strollers. The strollers are divided into pushchairs, prams and folding strollers for children from 15 to 22KG. Pushchairs for children above 15kg up to 22kg), and refined some technical specifications, improve the strength, fatigue and other test requirements of each component, the specific update is as follows:

EN 1888-1:2018 Part 1 - For strollers and strollers

EN 1888:2012 (old version)

EN 1888-1:2018 (new edition)

8.2.1.1 In the area where the baby can be contacted, there shall be no end-opening tube with a size between 7mm and 12mm and a completely closed annular opening unless its depth is less than 10mm.

8.2.1.1 In the area where the baby can be contacted, there shall be no completely closed openings on the rigid material that allow the 7mm gauge to enter, unless the depth is less than 10 mm or unless the shape assessment gauge can enter

no

8.3.2 Shear hazard

For bulges, awnings, etc. This requirement applies to the space between the frame parts and any slat tensioning device and frame parts connected thereto, within 100 mm of the distance from the main pivot point of the hood.

8.4 Winding hazard

25N tension, the free length must not exceed 220mm. This requirement does not apply to the free length of the restraint system. With a pull of 25N, the maximum perimeter of the ring must not exceed 360mm. This requirement does not apply to restraint systems and handles.

8.4 Winding risk

Ropes, straps and similar parts are attached to the cart together or spaced apart from each other by less than 80 mm, the maximum free length of all ropes is 220 mm and the combined length from one loose end to the other loose end should be a maximum of 360 mm

no

8.9.3 Stability hazard due to the position of the universal wheel

In order to avoid any hindrance to the correct operation of the cart due to the mutual contact of the universal wheels, any universal wheel should be able to rotate without interference with each other in the most unfavourable position.

6 In the area where the baby can be touched, the migration of elements must not exceed the following values:

Antimony: 60 mg/k

Chromium: 60 mg/kg

Arsenic: 25 mg/kg

Lead: 90mg/kg

Barium: 1000mg/kg

Mercury: 60mg/kg

Cadmium: 75mg/kg

Selenium: 500mg/kg

6 In the area where the baby can be touched, the migration of elements must not exceed the following values:

— Aluminum Al: 70000 mg/kg

— 铋Sb: 560 mg/kg

— Arsenic As: 47 mg/kg

— 钡Ba: 18750 mg/kg

— Boron B: 15000 mg/kg

— Cadmium Cd: 17 mg/kg

— Trivalent chromium Cr III: 460 mg/kg

— Hexavalent chromium Cr VI : 0,2 mg/kg

— Cobalt Co: 130 mg/kg

— Copper Cu: 7700 mg/kg

— Lead Pb: 160 mg/kg

— Magnesium Mg: 15000 mg/kg

— Mercury Hg: 94 mg/kg

— Nickel Ni: 930 mg/kg

— Selenium Se: 460 mg/kg

— 锶Sr: 56000 mg/kg

— Tin Sn: 180000 mg/kg

— Organotin Sn (organic) : 12 mg/kg

— Zinc Zn: 46000 mg/kg

Added EN 1888-2:2018 Part 2 - For carts from 15kg to 22kg for children

EN 1888:2012 (old version)

EN 1888-2:2018 (new edition)

15kg test weight for all tests

22kg test weight for all tests

8.1.3 restraint system and locking device

Pulling force: 150N/1 minute

6.1.3 restraint system and locking device

Pulling force: 220 N/1 minute

8.1.3 Buckle strength

Pulling force: 200N/1 minute

6.1.4 Fastener strength

Pull force: 250 N/1 minute

8.8 Number of parking and brake wear tests:

100 000 times

6.2 Parking and brake wear test times: an additional 33,000 times

8.10.3 Irregular road test times:

72,000 times

6.4.2 Number of irregular road tests:

An additional 24,000 additions

8.10.6 Pusher strength test times:

10,000 times

6.4.4 Number of pusher strength tests:

An additional 3,300 additional

Eqo has the world's leading laboratory for the detection of baby products. In the infant car trolley, walker, electric toy car, bicycle, crib, strap, baby carrier and other product testing, certification also has professional and comprehensive technical service capabilities. Can provide customers with efficient and complete one-stop service.

Hotline: 0512-5787 8076