Pricing system for childrens occupant restraint system GB27887 and childrens cars
Jiangsu billion Detection Technology Service Co., Ltd.
Price announcement of restraint system GB27887 for motor vehicle occupants
| category | Testing items | Requirement
(clause) | Method
(clause) | Price
(RMB) |
| Assembly | Corrosion resistance test | 5.1.1 | 6.1.1 | One thousand |
| Energy absorption test | 5.1.2 | Appendix Q | One thousand and five hundred |
| Reversal test | 5.1.3 | 6.1.2 | One thousand and five hundred |
|
| Dynamic test | 5.1.4 | 6.1.3 | Eight thousand |
| Eight thousand |
| Temperature test | 5.1.5 | 6.2.8 | Three thousand and six hundred |
| Structural examination | Four point three | -- | Five hundred |
| ISOFIX constraint system specification | Four point four |
| Five hundred |
| Identification check | Four point five | Eight | Five hundred |
| Installation instructions and instructions for use inspection | Four point six | Nine | Zero |
| parts | Buckle | Buckle temperature test | 5.2.1.7 | 6.2.8 |
|
| Belt fastener durability test -5000 times | 5.2.1.7 | -- | Two thousand |
| Buckle opening force test - loading | 5.2.1.8.1 | 6.2.1.1 | Four hundred and fifty |
| parts | Buckle | Button opening force test - no load | 5.2.1.8.2 | 6.2.1.2 | Four hundred and fifty |
| Buckle strength test | 5.2.1.9 | 6.2.1.3 | Five hundred and forty |
| Regulating device | Tension test of regulating device | 5.2.2.4 | 6.2.2.1 | Two hundred |
| Slippage of regulating device | 5.2.2.5 | 6.2.3 | Six hundred |
| Temperature test of regulating device | 5.2.2.5 | 6.2.8 |
|
| Durability test of regulator -5000 times | 5.2.2.7 | 6.2.7 | Two thousand and seven hundred |
| Webbing | Ribbon strength test - standard condition | 5.2.4.3 | 6.2.5.2.2 | Seven thousand |
| Ribbon strength test - illumination | 6.2.5.2.3 |
| Ribbon strength test - low temperature | 6.2.5.2.4 |
| Ribbon strength test - high temperature | 6.2.5.2.5 |
| Test of ribbon strength - Immersion | 6.2.5.2.6 |
| Weaving strength test - wear | 6.2.5.2.7 |
| Locking device | Locking device temperature test | 5.2.5.2 | 6.2.8 |
|
| Sliding test of class a device | 5.2.5.4 | 6.2.6.1 | One thousand and eight hundred |
| parts | Locking device | Sliding test of class B device | 5.2.5.5 | 6.2.6.2 | One thousand and eight hundred |
| ISOFIX | ISOFIX connection device durability test -2000 times | 5.2.6 | -- | Three thousand |
| Other | Material Science | Flame retardant test | 4.2.6 | GB 8410 | Three hundred |
| Material Science | Heavy metal detection |
| GB6675 | One hundred and fifty |
Jiangsu billion Detection Technology Service Co., Ltd.
CCC certification test price for baby carriage
Compulsory product certification test fees for toy products
(1) product name: child bicycle
Standard GB 14746-2006
Serial number | Testing items | Company | Charging standard (yuan / single item) | Remarks |
One | Sharp edge (standard 3.1.1) | platform | Forty-eight |
|
Two | Protrusion (standard 3.1.2) | platform | Forty |
|
Three | Safety fasteners (standard 3.1.3) | platform | Forty-eight |
|
Four | Braking system (standard 3.2.1) | platform | Eight |
|
Five | Location of brake handle (standard 3.2.2.1) | platform | Twelve |
|
Six | Brake handle dimensions (standard 3.2.2.2) | platform | Eight |
|
Seven | Brake element (standard 3.2.2.3) | platform | Eight |
|
Eight | Brake and brake box parts (standard 3.2.2.4) | platform | Sixteen |
|
Nine | Adjustment of brake (standard 3.2.2.5) | platform | Sixteen |
|
Ten | Foot brake (standard 3.2.3) | platform | Twenty-four |
|
Eleven | Strength of brake system for hand brake (standard 3.2.4.1) | platform | Twenty |
|
Twelve | Strength of brake system for foot brake (standard 3.2.4.2) | platform | Twenty-four |
|
Thirteen | Handbrake performance test (standard 3.2.5.1) | platform | Twenty |
|
Fourteen | Foot brake performance test (standard 3.2.5.2) | platform | Twenty |
|
Fifteen | Horizontal tube (standard 3.3.1) | platform | Sixteen |
|
Sixteen | Horizontal tube sleeve (standard 3.3.2) | platform | Sixteen |
|
Seventeen | Vertical riser (standard 3.3.3) | platform | Thirty-two |
|
Eighteen | Handlebar stability (standard 3.3.4) | platform | Thirty-two |
|
Nineteen | Permanent deformation of riser (standard 3.3.5.1) | platform | Thirty-two |
|
Twenty | Torque test for horizontal pipe and riser (standard 3.3.5.2) | platform | Thirty-two |
|
Twenty-one | Torque test for riser and front fork riser (standard 3.3.5.3) | platform | Thirty-two |
|
Twenty-two | Impact test (heavy objects fall (standard 3.4.1)) | platform | Eighty |
|
Twenty-three | Impact test (frame / front fork assembly falling) (standard 3.4.2) | platform | Eighty |
|
Twenty-four | Front fork (standard 3.5) | platform | Eight |
|
Twenty-five | Radial circular jump momentum (standard 3.6.1.2) | platform | Twenty-four |
|
Twenty-six | Axial circular jump momentum (standard 3.6.1.3) | platform | Twenty-four |
|
Twenty-seven | Clearance (standard 3.6.2) | platform | Twenty-four |
|
Twenty-eight | Static load (standard 3.6.3) | platform | Eighty |
|
Twenty-nine | Front wheel clamping force (standard 3.6.4.2) | platform | Thirty-two |
|
Thirty | Rear wheel clamping force (standard 3.6.4.3) | platform | Thirty-two |
|
Thirty-one | Maximum inflation pressure (standard 3.7.1 bar) | platform | Sixteen |
|
Thirty-two | Matching of pneumatic tyres and rims (standard 3.7.2) | platform | Twenty-four |
|
Thirty-three | Installation quality of tread on foot (standard 3.8.1.1) | platform | Sixteen |
|
Thirty-four | Foot tread surface requirements (standard 3.8.1.2) | platform | Eight |
|
Thirty-five | Ground clearance (no spring shock) (standard 3.8.2.1.1) | platform | Twenty |
|
Thirty-six | Ground clearance (spring shock avoidance) (standard 3.8.2.1.2) | platform | Twenty |
|
Thirty-seven | Toe clearance (standard 3.8.2.2) | platform | Twenty-four |
|
Thirty-eight | Dynamic test of pedal / crank assembly (standard 3.8.3) | platform | Forty-eight |
|
Thirty-nine | Limited size (standard 3.9.1) | platform | Ten |
|
Forty | Saddle tube (standard 3.9.2) | platform | Ten |
|
Forty-one | Saddle adjusting clamp (standard 3.9.3) | platform | Thirty-two |
|
Forty-two | Strength of saddle (standard 3.9.4) | platform | Forty-eight |
|
Forty-three | Static load test of drive system (standard 3.10) | platform | Ninety-six |
|
Forty-four | Chain cover (standard 3.11) | platform | Thirty-two |
|
Forty-five | Dimensions (standard 3.12.1) | platform | Eight |
|
Forty-six | Vertical load test (standard 3.12.2) | platform | Thirty-six |
|
Forty-seven | Longitudinal load test (standard 3.12.3) | platform | Thirty-six |
|
Forty-eight | Specification (standard 3.13) | platform | Twenty |
|
Forty-nine | Logo (standard 3.14) | platform | Ten |
|
Fifty | Assembly fee (standard 4 chapter) | platform | Fifty |
|
Description: the inspection fee of a single product is calculated according to the actual testing items. If the product needs to be supplemented by differential test in the same report, the cost should be calculated according to the actual difference detection items.
(two) product name: children tricycle
Standard: GB 14747-2006
Serial number | Testing items | Company | Charging standard (yuan / single item) | Remarks |
One | Migration of specific elements (standard 4.1.1 bar) | platform | 200.00/
Each material | Collection according to actual material category |
Two | Burning behavior (standard 4.1.2) | platform | Fifty |
|
Three | Mechanical strength (standard 4.2) | platform | One hundred |
|
Four | Sharp points (standard 4.3.2) | platform | Forty-eight |
|
Five | Sharp edge (standard 4.3.1) | platform | Forty-eight |
|
Six | Protrusion (standard 4.3.3) | platform | Forty |
|
Seven | Pinch point (standard 4.3.4) | platform | Forty-eight |
|
Eight | Small parts (standard 4.3.5) | platform | Forty-eight |
|
Nine | Driving stability (standard 4.4.1) | platform | Ninety |
|
Ten | Stability of forward tilt (standard 4.4.2.1) | platform | Thirty-six |
|
Eleven | Stability of backward tilt (standard 4.4.2.2) | platform | Thirty-six |
|
Twelve | Connecting fasteners (standard 4.5.1) | platform | Twenty |
|
Thirteen | Protective cap (standard 4.5.2) | platform | Forty |
|
Fourteen | Insert the riser into the depth mark (standard 4.5.3.1). | platform | Ten |
|
Fifteen | The strength of the riser (standard 4.5.3.2) | platform | Forty-eight |
|
Sixteen | Horizontal tube (standard 4.5.3.3) | platform | Sixteen |
|
Seventeen | Two ends of horizontal pipe (standard 4.5.3.4). | platform | Sixteen |
|
Eighteen | Vertical riser clamping device (standard 4.5.3.5) | platform | Forty-eight |
|
Nineteen | Insertion depth of saddle tube (standard 4.5.4.1) | platform | Twenty-four |
|
Twenty | Saddle adjusting clamping device (standard 4.5.4.2) | platform | Seventy-two |
|
Twenty-one | Impact strength (standard 4.5.5) | platform | Sixty |
|
Twenty-two | Fastness of backrest structure (standard 4.5.6) | platform | Ninety-six |
|
Twenty-three | Strength of auxiliary putter (standard 4.5.7) | platform | Eighty |
|
Twenty-four | Pedal structure (standard 4.5.8.1) | platform | Twenty-four |
|
Twenty-five | Pedal height (standard 4.5.8.2) | platform | Twenty |
|
Twenty-six | Product identification and instructions for use (standard 4.6) | platform | Thirty |
|
Twenty-seven | Assembly fee (standard 5 chapter) | platform | Thirty |
|
Description: the inspection fee of a single product is calculated according to the actual testing items. If the product needs to be supplemented by differential test in the same report, the cost should be calculated according to the actual difference detection items.
(three) product name: child trolley.
Standard: GB 14748-2006
Serial number | Testing items | Company | Charging standard (yuan / single item) | Remarks |
One | Migration of specific elements (standard 4.1.2 bar) | platform | 200.00/
Each material | Collection according to actual material category |
Two | Metal surface (standard 4.2) | platform | Eight |
|
Three | Flame retardancy (standard 4.3) | platform | Fifty |
|
Four | Exposed open pipe (standard 4.4.1) | platform | Twenty-four |
|
Five | Dangerous crevice (standard 4.4.2.1) | platform | Eighty |
|
Six | Shear and pinch point (standard 4.4.2.2) | platform |
Seven | Edge and tip (standard 4.4.3) | platform | Forty-eight |
|
Eight | Small parts (standard 4.4.4.1) | platform | Thirty |
|
Nine | Non detachable parts in touchable area (standard 4.4.4.2) | platform | Thirty |
|
Ten | Shedding parts (standard 4.4.4.3) | platform | Forty-eight |
|
Eleven | Protrusion (standard 4.4.5) | platform | Forty |
|
Twelve | Connection of mechanical parts (standard 4.4.6.1) | platform | Ninety-six |
|
Thirteen | Strings, belts and other narrow strips (standard 4.4.6.2) | platform | Twenty-five |
|
Fourteen | Minimum internal height of horizontal pocket (standard 4.5.1) | platform | Twenty |
|
Fifteen | Seat Seat cushion and backrest angle and back height (standard 4.5.2) | platform | Thirty |
|
Sixteen | Applicable age of cart (standard 4.6) | platform | Thirty |
|
Seventeen | hand basketA device for connecting a sleeping bag and a seat pocket to a frame (standard 4.7). | platform | Forty-eight |
|
Eighteen | Stability (standard 4.8) | platform | Ninety-six |
|
Nineteen | Strength of handlebars (standard 4.9) | platform | One hundred and fifty |
|
Twenty | Brake device (standard 4.10) | platform | One hundred and twenty |
|
Twenty-one | Folding locking device (standard 4.11) | platform | Eighty |
|
Twenty-two | Strength and durability of the connecting device for a removable basket pocket or seat pocket (standard 4.12) | platform | Eighty |
|
Twenty-three | Strength of bound system (standard 4.13.1) | platform | Ninety-six |
|
Twenty-four | Regulating mechanism performance requirements (standard 4.13.2) | platform | Ninety-six |
|
Twenty-five | Strength of safety belt buckles (standard 4.13.3) | platform | Forty-eight |
|
Twenty-six | Strength of wheels (standard 4.14) | platform | Forty-eight |
|
Twenty-seven | Dynamic durability test (standard 4.15) | platform | Three hundred and sixty |
|
Twenty-eight | Impact strength (standard 4.16) | platform | One hundred and twenty |
|
Twenty-nine | Static strength (standard 4.17) | platform | Forty-eight |
|
Thirty | Plastic packaging bags and soft plastic films (standard 6 chapters) | platform | Forty |
|
Thirty-one | Product identification and instructions for use (standard 7 chapter) | platform | Thirty |
|
Description: the inspection fee of a single product is calculated according to the actual testing items. If the product needs to be supplemented by differential test in the same report, the cost should be calculated according to the actual difference detection items.
(four) product name: baby walker.
Standard: GB 14749-2006
Serial number | Testing items | Company | Charging standard (yuan / single item) | Remarks |
One | Migration of specific elements (standard 4.1.2 bar) | platform | 200.00/
Each material | Collection according to actual material category |
Two | Metal surface (standard 4.2) | platform | Eight |
|
Three | Wooden parts (standard 4.3.1) | platform | Sixteen |
|
Four | Dangerous cracks, holes and openings (standard 4.3.2) | platform | Thirty-two |
|
Five | Spring (standard 4.3.3) | platform | Thirty-two |
|
Six | Protrusion (standard 4.3.4) | platform | Forty |
|
Seven | Accessible parts (standard 4.3.5) | platform | Forty |
|
Eight | Rope / elastic rope and other rope like objects (standard 4.3.6) | platform | Twenty-five |
|
Nine | Locking, folding and frame adjustment devices (standard 4.3.7) | platform | Thirty-two |
|
Ten | Squeezing and shearing (standard 4.3.8) | platform | Forty-eight |
|
Eleven | Width of hip belt (standard 4.3.9) | platform | Sixteen |
|
Twelve | Seats (standard 4.3.10) | platform | One hundred and twenty |
|
Thirteen | Walker wheel (standard 4.3.11) | platform | Thirty-two |
|
Fourteen | Frame height from ground (standard 4.3.12) | platform | Sixteen |
|
Fifteen | Distance between collision avoidance (standard 4.3.13) | platform | One hundred and twenty |
|
Sixteen | Static stability (standard 4.4) | platform | Ninety-six |
|
Seventeen | Dynamic stability (standard 4.5) | platform | Ninety-six |
|
Eighteen | Static strength (standard 4.6) | platform | Ninety-six |
|
Nineteen | Dynamic strength (standard 4.7) | platform | One hundred and twenty |
|
Twenty | Impact strength (standard 4.8) | platform | One hundred and twenty |
|
Twenty-one | Flame retardancy (standard 4.9) | platform | Fifty |
|
Twenty-two | Plastic bags or plastic films for packaging or walkers (standard 4.10) | platform | Twenty-four |
|
Twenty-three | Product identification and instructions for use (standard 4.11) | platform | Thirty |
|
Explain:
The inspection fee of a single product is calculated according to the actual testing items. If the product needs to be supplemented by differential test in the same report, the cost should be calculated according to the actual difference detection items.
(five) product name: Toy
Standard: GB 6675
Serial number | Testing items | Company | Charging standard (yuan / single item) | Remarks |
One | Similar simulation weapon toys (standard 4.1.28) | platform | Ten |
|
Two | Toy signs and instructions for use (standard 4.4) | platform | Thirty |
|
Three | Normal use (standard 4.1.1) | platform | Fifty |
|
Four | Predictability of reasonable abuse (standard 4.1.2) | platform | One hundred |
|
Five | Materials (standard 4.1.3) | platform | Ten |
|
Six | Small parts (standard 4.1.4) | platform | Fifteen |
|
Seven | Extruded toys, rattles and similar toys (standard 4.1.5a) | platform | Ten |
|
Eight | Ball (standard 4.1.5b) | platform | Ten |
|
Nine | Hair ball (standard 4.1.5c) | platform | Ten |
|
Ten | Preschool dolls (standard 4.1.5d) | platform | Ten |
|
Eleven | Toy nipple (standard 4.1.5e) | platform | Ten |
|
Twelve | Balloon (standard 4.1.5f) | platform | Five |
|
Thirteen | Marbles (standard 4.1.5g) | platform | Ten |
|
Fourteen | Accessible metal or glass edge (standard 4.1.6a) | platform | Twenty |
|
Fifteen | Functional sharp edges (standard 4.1.6b) | platform | Ten |
|
Sixteen | Metal toys edge (standard 4.1.6c) | platform | Fifteen |
|
Seventeen | Molded toys edge (standard 4.1.6d) | platform | Ten |
|
Eighteen | Edge of exposed bolt or threaded rod (standard 4.1.6e) | platform | Twenty |
|
Nineteen | Accessible sharp points (standard 4.1.7a) | platform | Fifteen |
|
Twenty | Functional sharp points (standard 4.1.7b) | platform | Ten |
|
Twenty-one | Wooden toys (standard 4.1.7c) | platform | Ten |
|
Twenty-two | Protrusion (standard 4.1.8) | platform | Fifteen |
|
Twenty-three | Wires and rods (standard 4.1.9) | platform | Forty |
|
Twenty-four | Plastic bags or plastic films for packaging or toys (standard 4.1.10) | platform | Twenty-four |
|
Twenty-five | Rope and elastic rope (standard 4.1.11a) for toys used by children under 18 months or below | platform | Fifteen |
|
Twenty-six | Self retractable rope (standard 4.1.11b) on toys used by children under 18 months of age and below | platform | Ten |
|
Twenty-seven | Rope or elastic cord (standard 4.1.11c) for dragging toys used by children under 36 months or below | platform | Ten |
|
Twenty-eight | Rope on toy bag (standard 4.1.11d) | platform | Ten |
|
Twenty-nine | Hanging toys on children's beds or game fences (standard 4.1.11e) | platform | Ten |
|
Thirty | Fitness toys and similar toys (standard 4.1.11f) on children's beds | platform | Ten |
|
Thirty-one | Ropes, strings or wires (standard 4.1.11g) for flying toys | platform | Forty |
|
Thirty-two | Toy trolley, toy cradle car and similar toy (folding mechanism) (standard 4.1.12a) b) | platform | Thirty-five |
|
Thirty-three | Other toys (standard 4.1.12c) with folding mechanism | platform | Thirty-five |
|
Thirty-four | Hinge line clearance (standard 4.1.12d) | platform | Ten |
|
Thirty-five | Circular holes on rigid materials (standard 4.1.13a) | platform | Ten |
|
Thirty-six | Gap between moving parts (standard 4.1.13b) | platform | Fifteen |
|
Thirty-seven | The chain or belt (standard 4.1.13c) for riding a toy. | platform | Ten |
|
Thirty-eight | Other driving agencies (standard 4.1.13d) | platform | Fifteen |
|
Thirty-nine | Clockwork key (standard 4.1.13e) | platform | Ten |
|
Forty | Spring (standard 4.1.14) | platform | Fifteen |
|
Forty-one | Roll stability of toys (standard 4.1.15a) with stable feet | platform | Thirty |
|
Forty-two | Roll stability (standard 4.1.15b) of toys that do not stabilize their feet | platform | Thirty |
|
Forty-three | Stability before and after (standard 4.1.15c) | platform | Thirty |
|
Forty-four | Overloading requirements for toys and seats (standard 4.1.15d) | platform | Sixty |
|
Forty-five | Stability of toys resting on the ground (standard 4.1.15e) | platform | Twenty |
|
Forty-six | Ventilator (standard 4.1.16a) | platform | Fifteen |
|
Forty-seven | Covers, doors and similar devices (standard 4.1.16b) | platform | Ten |
|
Forty-eight | Support device for toy box and similar toys (standard 4.1.16c) | platform | One hundred and fifty |
|
Forty-nine | Toy with closed head (standard 4.1.16d) | platform | Fifteen |
|
Fifty | Imitation protective toys (standard 4.1.17) | platform | Twenty |
|
Fifty-one | General requirements for ejection toys (standard 4.1.18.1) | platform | Ten |
|
Fifty-two | Energy storage ejection toy (standard 4.1.18.2) | platform | Eighty |
|
Fifty-three | Non stored energy ejection toy (standard 4.1.18.3) | platform | Sixty |
|
Fifty-four | Water toys (standard 4.1.19) | platform | Fifteen |
|
Fifty-five | Brake device (standard 4.1.20) | platform | One | Sixty |
|
Fifty-six | platform | One | Twenty |
|
Fifty-seven | Maximum saddle height of toy bicycle (standard 4.1.21.2) | platform | Twenty |
|
Fifty-eight | Brake requirements for toy bicycles (standard 4.1.21.3) | platform | Seventy |
|
Fifty-nine | Speed requirements for electric children's cars (standard 4.1.22) | platform | Forty |
|
Sixty | Heat source toys (standard 4.1.23) | platform | One hundred and twenty |
|
Sixty-one | Liquid filled toys (standard 4.1.24) | platform | Seventy |
|
Sixty-two | Mouth toys (standard 4.1.25) | platform | A+b:50.00 |
|
Sixty-three | C:30.00 |
|
Sixty-four | D:10.00 |
|
Sixty-five | Toy roller skates and toy skateboards (standard 4.1.26) | platform | Ten |
|
Sixty-six | Toy powder cap (standard 4.1.27) | platform | Ten |
|
Sixty-seven | General requirements for combustion performance (standard 4.2.1.1) | platform | Thirty |
|
Sixty-eight | Extend the beard, whisker, wig and mask and other hair, plush or other accessories on the surface of toys with a length greater than or equal to 50mm (standard 4.2.1.2). | platform | Fifty |
|
Sixty-nine | Extend the beard, whisker, wig and mask and other hair, plush or other accessories on the surface of toys with a length less than 50mm (standard 4.2.1.3). | platform | Fifty |
|
Seventy | Costume (standard 4.2.1.4) | platform | Fifty |
|
Seventy-one | Toys for children to enter (standard 4.2.1.5) | platform | Fifty |
|
Seventy-two | Soft stuffed toys (standard 4.2.1.6) | platform | Fifty |
|
Seventy-three | Migration of specific elements (standard 4.3) | platform | 200.00/
Each material | Collection according to actual material category |
Explain:
1, the inspection fee of a single product is calculated according to the actual testing items. If the product needs to be supplemented by differential test in the same report, the cost should be calculated according to the actual difference detection items.
2. Sampling inspection of plastic, metal, electrical, ejection and doll toys certification inspection is conducted in a certain proportion. Under normal circumstances, the sample does not exceed 1/4 of the certificate number of each category, but the product is tested on the whole item. Therefore, the supervision and re examination of the sampling inspection fees shall be based on the 1/4 calculation of all the unit testing fees of each type of products certified.
3. The standard also applies to electric children's cars, toy bicycles and other toy vehicles.
(six) product name: electric toy.
Standard: GB 19865-2005
Serial number | Testing items | Company | Charge standard (yuan) | Remarks |
One | The principle of exemption and exemption (standard 6 Chapter) | platform | Thirty |
|
Two | Identification and description (standard 7 chapter) | platform | Twenty |
|
Three | Input power (standard 8 chapter) | platform | Sixty |
|
Four | Fever and abnormal work (standard 9 chapters) | platform | Three hundred |
|
Five | Electrical strength at working temperature (standard 10 chapter) | platform | Ninety |
|
Six | Moisture resistance (standard 11 chapter) | Protection of the use of battery toys and usable liquids to clean the shell of toys in water | platform | Eighty |
|
Seven | Humidity resistance | platform | Two hundred and forty |
|
Eight | Electrical strength at room temperature (standard 12 chapter) | platform | Ninety |
|
Nine | Mechanical strength (standard 13 chapter) | platform | Eighty-four |
|
Ten | Structure (standard 14 chapter) | platform | One hundred and sixty |
|
Eleven | Protection of flexible wires and wires (standard 15 chapter) | platform | Forty |
|
Twelve | Components (standard 16 chapter) | platform | One hundred and eight |
|
Thirteen | Screws and connections (standard 17 chapters) | platform | Sixty |
|
Fourteen | Electrical clearance and creepage distance (standard 18 chapters) | platform | Sixty |
|
Fifteen | Heat and flame resistance (standard 19 chapters) | platform | Two hundred and ten |
|
Explain:
1, electric toys simultaneously execute two standards of GB 6675 and GB 19865, and charges should be accounted for and charged according to the test fees incurred by two standards.
2, the inspection fee of a single product is calculated according to the actual testing items. If the product needs to be supplemented by differential test in the same report, the cost should be calculated according to the actual difference detection items.
3. The sampling inspection for the supervision and reexamination of electric toys certification is conducted in a certain proportion. Under normal circumstances, the sample does not exceed 1/4 of the certificate number of each category, but the detection of the product is a full item test. Therefore, the supervision and re examination of the sampling inspection fees shall be based on the 1/4 calculation of all the unit testing fees of each type of products certified.
4, the standard of charge is also applicable to electric children's cars.
Bank and account: Bank of China Kunshan Lu Jia branch 506661480917
Feedback call: 0512-57878076/0512-57871992
