Children are the future of the motherland and the hope of the family. Matters related to children's clothing also attracts more and more attention of the whole society. The relevant departments of the state pay attention to the supervision of children's products from various levels. In the first half of 2017, the Jiangsu Provincial Bureau of industry and Commerce organized a random inspection of children's articles in the circulation sector of the province. A total of 716 batches of children were sampled, including 300 batches of children's clothing, 36 batches of children's pads, 60 batches of children's shoes, 183 batches of remote controlled children's toys, 120 batches of children's toys (non remote control), 17 batches of car safety seats for children.

In the first half of this year, the Jiangsu Provincial Bureau of industry and Commerce carried out quality sampling for 6 items of children's clothing, such as children's clothing, children's remote control toys and so on, which were more concentrated in 2016, and the consumer complaints were relatively large. The sampling inspection was released a few days ago. Among the 716 batches tested, 374 batches were tested, and the pass rate was 52.2%. Compared with the same period in 2016, the quality has increased by 0.5 percentage points, but there are still many security risks in production, design and use. Among them, the qualified rate of remote control children's toys and children's clothing is relatively low (5.5%, 59.3%), resulting in the overall pass rate is not very high, but compared with the same period in previous years, the overall quality has steadily increased.

Note: Jiangsu Provincial Bureau of industry and Commerce pays attention to sticking to problem oriented sampling inspection. When sampling inspection plans are made, commodities with relatively high quality problems and goods with relatively high concentration of consumers are selected as sampling samples, and the commercial samples with potential quality problems are included in the spot inspection samples when on-site sampling is conducted, which leads to a higher detection rate of the problem commodities and a corresponding reduction in the pass rate of quality sampling inspection. This reminds consumers that the test results do not really represent the overall quality of market circulation commodities.

I. inspection items: select the safety performance, quality status and use instructions of consumers as the testing objects.

1, children's clothing

It mainly detects safety, performance and instructions. The main safety components are formaldehyde, decomposable carcinogenic aromatic amine dyes, odor, rope requirements, appendages sharp edge and sharp edges, accessories tensile strength, sewing strength (buttons), residual metal pins, ortho benzene two formic acid, total heavy metals, extractable heavy metal content and other items; the main performance parts are: pH value, color fastness (water resistance, sweat resistance, saliva resistance, friction resistance, washability), fiber composition and content, durability label location and other items; and logo identification (instruction) project.

2, children's cars

It mainly examines the quality of materials, the maximum limits of specific migrable elements, the metal surface, the combustion properties, the physical and mechanical properties (exposed open pipes, dangerous joints, shear and pinch points, sharp edges and tips), age, structure, stability, braking, folding and locking devices, strength and durability of connection devices, strength, mechanism performance, safety belt buckle, strength, marking and use instructions.

3, children's shoes

It mainly detects sensory quality, physical and mechanical safety performance, strength (peel off, bottom pull out), wear resistance, hardness, color fastness, marking / marking, formaldehyde content, decomposable aromatic amine dye, hook hardness, heel hardness and so on.

4. Remote control toys for children

It mainly detects radiation spurious, usage frequency, occupancy bandwidth and carrier frequency tolerance.

5, remote control toys

It mainly tests plasticizers, mechanical and physical properties, migration of specific elements, and signs and instructions.

6, car safety seat for children

The main test is dynamic test (used to keep children in the seat position restraint system, buckle / locking device or displacement system, standard safety belt, chest acceleration, abdominal invasive test and dummy mobility, etc.), identification and manual inspection items.

Two. Sampling results: fully verify that the problem oriented sampling inspection can effectively detect the safety risks and quality problems of the market circulation commodities.

(1) for children's clothing (sampling 300 batches, 178 batches of qualified), 2 items of safety, 6 items of performance and instructions for use are not qualified.

One

Safety Part: GB31701-2015 "infant and child textile product safety technical specification" is China's first mandatory national standard specifically for infants and children's textile products. It has carried out a comprehensive specification on the safety performance of children's clothing (formally implemented in June 1, 2016). According to this standard, 2 projects failed.

(1) rope bands require 14 batches. According to the GB, no rope should be worn on the head and neck of children's clothing and infant clothing items under the age of 7, and the rope should be within the specified length. The unqualified products mainly reflect the length of rope or rope ring on children's and infant's clothing. Unsuitable or unreasonable rope may hook and hang around other children's body and neck, resulting in injury, entanglement or even suffocation, while the waist rope may hook the moving vehicle and cause danger.

(2) 5 batch of accessories tensile strength. The national standard requires that the tensile strength of the accessories with maximum dimensions larger than 6mm for children and infant clothing should be more than 70N. The tensile strength of the accessories with a maximum size between 3 and 6mm should be equal to or equal to 50N, and the maximum size is less than 3mm or the attachments that can not be held should be checked for changes after washing. The unqualified goods are mainly reflected in the attachment, which is damaged, shedding or other damaged when the value is less than the specified value. Once the attachment falls off, it is very easy to induce children to swallow, which can cause choking and other safety accidents.

Two

Performance part: mainly pH value, fiber composition and content, color fastness [sweat resistance, saliva, friction resistance, washing (soap)] unqualified

(1) pH value of 3 batches. The pH value of infant clothing should be between 4 and 7.5. The pH value of children's clothing directly touching the skin should be between 4 and 8.5, and the pH value of children's clothing that is not directly exposed to the skin should be between 4 and 9. Too high acidity and alkalinity on clothing, exceeding the pH range of human skin, will cause irritation and corrosion to human skin, easily cause skin itch, dermatitis and other symptoms. It may also cause damage to the sweat gland system and nervous system of the human body, and cause greater harm to children and infants.

(2) 72 batches of fiber composition and content. The name of fiber should be used in clothing for children and infants, and the deviation of fiber content should be within the stipulated tolerance range. The unqualified goods are mainly reflected in the fact that the fiber composition is inconsistent with the label. The fiber types are mislabeled, missing or multi standard, the fiber content deviation exceeds the prescribed tolerance range, and the fiber content and content of different fabrics are not marked separately.Improper marking of fiber composition and content and even shoddy, misleading consumers will have the suspicion of false high commodity prices. It will also affect the washing and maintenance of clothing and damage the interests of consumers.

(3) a total of 46 batches of color fastness (1 batches of Perspiration resistance, 3 batches of saliva, 40 resistance to friction, 2 batches of washing). 耐汗渍色牢度不合格，容易使婴幼儿在穿着出汗时沾染其他衣物或使身体遭受染料中化学物质的侵害；婴幼儿喜欢用嘴感知世界，经常会吞咬衣物，婴幼儿服装耐唾液色牢度（国标规定应≥4级）不合格，染料会被婴幼儿吸进口中，进入体内，危害健康，如染料中含有重金属离子，对婴幼儿身体伤害更大；耐摩擦色牢度包括耐干摩擦色牢度（11批次）和耐湿摩擦色牢度（29批次）不合格的服装碰到物理摩擦时，染料容易脱落引起褪色或沾染，影响美观，且脱落的染料分子或重金属离子可能通过皮肤被人体吸收而危害健康；耐（皂）洗色牢度级别超出标准要求的儿童及婴幼儿服装在洗涤过程中容易褪色和沾染其他衣物，影响美观，严重时可能造成质量事故。

Three

There are 82 batches of logo identification (instructions). Children and infant clothing items should be marked with the manufacturer's name and address, product name, product size or size, fiber composition and content, maintenance method, product standard, safety category, use and storage precautions, etc. infant textile products should also be marked with "baby products". The failure is mainly reflected in the following aspects: the lack of fiber content and content on the durability label or tag, the lack of maintenance methods or incorrect maintenance methods, lack of type, specification or product size, non-standard information, incorrect product standards, lack of manufacturer's name and address, absence of safety category or label of safety category, incorrect product name, no durability label, etc. The wrong fiber labels will mislead and deceive consumers. Wrong washing and maintenance labels will cause consumer disputes. Lack of logo information will cause inconvenience to consumers and lead to quality safety accidents.

(two) for children's trolley (sampling 36 batches, qualified 29 batches), there are problems in connection of mechanical parts, dangerous cracks, product marks and instructions, and age of the cart.

1 the connection of mechanical parts is not qualified for 1 batches.

According to the GB, the rope, belt and other narrow strips in the sleeping bag or pocket of a vehicle should be less than 220mm when the tensile force is applied to 25N. The unqualified item is mainly the awning rope in the accessible area, and its free length is 251mm. Such products, if there is no adult guidance, will inevitably lead to unforeseen consequences.

2 3 dangerous batches failed.

The national standard requires that when the child cart is in normal use position, there should be no risk of injury to the body in the child accessible area. The unqualified items are: the 1 batch is when the handle is placed on the back side, the dangerous part between the commutation handle and the carbody is formed; under the 1 batches of the armrest, there is a dangerous crack between the hand tube and the carbody part; the 1 batches are the current handrails to the bottom side, and when the pedals are transferred to the top side, there is a dangerous gap between the front handrails and the pedals. The product is very easy to bring security risks to users.

3 product marks and instructions 6 batches failed.

Instructions on the use and adjustment of safety belts, safety use methods and assembly and assembly instructions, safety warning, and other identification information are not eligible: the 3 batch only has instructions for belt use, no hip belt instructions, 1 batch of no brake device operation and seat belt adjustment instructions, 1 batch no seat adjustment regulation, 1 batches no warning! This child cart is not suitable for children under 6 months of age "warning sign". Missing such information can easily lead to safety accidents.

The age of 4 cart is not up to 1 batches.

The substandard products are mainly not tested according to the corresponding plug gauge (for new children's vehicles, the plug gauge of diameter 76.2mm can not pass through the left and right sides of the seat and the opening of the head side fence). Plug gauge can be opened through the seat side fence. Once these products are used carelessly, they will have an impact on children's health.

(three) for children's shoes (sampling 60 batches, qualified 48 batches), mainly sensory quality, wear resistance, hardness at the outsole, logo / logo (use instructions) and other aspects do not meet the requirements.

Compared with the same period in 2016, the overall pass rate of children's shoes has decreased, but the quality of products has been improved qualitatively. In the first half of last year, 41 batches of 50 batches were sampled, and the overall pass rate was 82%. In the first half of this year, 48 batches of 60 batches were sampled, with a pass rate of only 80%. But last year's problems were mainly concentrated in formaldehyde and lead. None of the two indicators has been detected this year. It is obvious that sampling inspection has played a certain role in promoting the production of factories.

1 sensory quality 3 batches are not up to standard.

According to the relevant product standards, the appearance quality and touch feel of children's shoes products (overall appearance, facade, heel, outsole, suture, etc.) should meet the standard requirements. This disqualification is mainly reflected in the difference between the length of the front part, the height of the heel and the hardness of the shoe. Sensory quality is an important quality index of footwear products, which directly affects consumers' purchase of commodities.

2 logo identification (instructions) 29 batches are not up to standard.

The standard requires that each pair of shoes should include factory name or trademark, Chinese shoe number and model. The inside package (shoe box) should include factory name, factory site, product name (main shoe upper material), Chinese shoes number, product number, product grade, product standard, shoes color and so on. However, the problems found in spot checks are mainly the incomplete contents. Logo is an important way to reflect product and enterprise information. Although it does not directly affect the quality of products, it is the basis for consumers to understand the commodity media and choose products. If this item is not standardized, it will cause great inconvenience to the sales units and consumers, and even mislead consumers, thereby damaging the legitimate rights and interests of consumers.

3 wear resistance of 10 batches is not up to standard.

The wear resistance of children's shoes should not be greater than the prescribed value, and the phenomenon of sulfur deficiency or wear and tear should not occur. The main problem is the length of the grinding marks is greater than the specified value and the wear of the outsole. Wear resistance reflects the wear resistance of children's shoes in the wearing process, the better wear resistance, and the longer wear time of the soles. The unqualified items directly affect the wearing life of shoes.

4 the hardness of outsole 2 batches are not up to standard.

The hardness of the solid core bottom of children's shoes should be (45~65) Shaoer A; the hardness of microcellular foam outsole should be (45~65) Shahr C. The main problem is that the measured hardness is greater than the specified value. Children's feet are rich in nerve and vascular network. Excellent soles will make the impact force of the foot very large when children walk. The hardness of the outsole will directly affect the foot type development of children.

(four) remote control children's toys (sampling 183 batches, qualified 10 batches) are mainly related to radiation stray, usage frequency, occupancy bandwidth and carrier frequency tolerance.

Compared with the same period in 2016, the overall pass rate increased slightly. In the first half of 2016, 98 batches were sampled, and only 3 batches were qualified, with a pass rate of 3.1%. The pass rate in the first half of this year was 5.46%. But the problem remained the same. The 4 unqualified indicators do not meet the requirements of the letter No. [2005]423 on the announcement of the technical requirements for the release of micro power (short distance) radio equipment.

1, 156 batches of radiation stray disqualification.

When using this unqualified toy, it will interfere with other electrical products and communication products. The failure of other electrical appliances or communication products will result in failure of other remote control devices or products. Long term acceptance of strong electromagnetic radiation will cause human immunity decline, metabolic disorder, memory loss, vision loss, hearing loss and other diseases. Misuse of products used in this frequency band will result in unforeseen consequences.

2, the frequency of 30 batches, the occupied bandwidth 88 batches, the carrier frequency tolerance 107 batches do not meet the requirements.

The use of any of these unqualified children toys will result in malfunctions in products used in this frequency band, resulting in unforeseen consequences. In particular, the frequency of use, the state clearly stipulates that children's remote control toys can only be used within the specified frequency range.

(five) non remote control children's toys (sampling 120 batches, qualified 93 batches) are mainly plasticizers, mechanical and physical properties, migration of specific elements, signs and instructions for use, electrical properties of toys (suitable for electric toys) and other problems.

1 plasticizer failed in 7 batches.

The plasticizer content of plasticized materials in accessible toys and components should not exceed the standard: DBP+BBP+DEHP less than 0.1% (all products include products that can be put into the mouth), DNOP+DINP+DIDP less than 0.1% (products that can be put into the mouth). After testing and evaluating the high-risk soft plastic material (the most likely plasticizer exceeded the standard material on the inspection sample), 7 items failed. Once these products are used, it is easy to have an impact on children's health.

2 physical and mechanical properties failed, 18 batches failed.

1 there are 7 batches of plastic bags or plastic films that are not qualified for packaging or toys. The thickness of plastic bags or plastic films in the products is less than 0.038mm and there is no required opening. There is a risk of suffocation harm when children play with their mouth and nose.

2 energy storage ejection toys: 4 batches failed. The 1 batch produced small parts in the abuse test and could be launched by the ejection device; the 1 batch of samples had launched non toy matching ejection objects, such as pencils, without warning on the samples; the 1 batches of samples ejected were detected to exceed the standard of ejection kinetic energy, and the soft rubber suction cups at the end of the 1 batches of samples ejected after the tensile force test of the protective parts, and no ejection of the plastic rod ejection objects at the protective end of the suction cup, which was a hard ejection object, and could be launched in the launching mechanism, causing danger to children.

3 small parts: toys for children under 36 months of age: 2 batches are not qualified. The sample produces small parts in the abuse test, and there is a risk of suffocation caused by the child's improper swallowing.

4 highlights: 5 batches failed. After the abuse test, the wheel is broken, resulting in a dangerous protrusion of the axle, which is the risk of stabbing when a child falls on it.

5 touches of sharp points: 1 batches are not qualified. After the abuse test, the sample exposes a touches of sharp touches, which is a risk of stabbing children's skin.

6 imitation protective toys: 1 batches are not qualified. Protective clothing for children (including, but not limited to, building helmets, sports helmets and fire helmets) for children, should be set up with caution. No warning instructions for imitation protective toys are available on the samples.

7 balls: there are no warning instructions for 1 batches of samples. Toys for children who are used for 36 months or more but less than 96 months should be provided with warning notes if they are small balls or balls containing dismantling balls or balls dropped after abuse tests. Such products are prone to cause unforeseen dangers when used.

3 marks and instructions for use 4 batches failed.

Among them, 1 batches are the standard number of the sample's packaging, instructions or labels without toy product implementation standard GB19865-2005; there are 1 batch of samples without the relevant warning signs and toy warning signs, such as ball warning, etc.; there are 1 batch of samples without warning instructions for imitation protective toys; 1 batches of samples can launch ejection products provided by non toys, and no warning instructions are provided. It will mislead consumers and make it difficult to predict.

4 electrical performance of toys (applicable to electrical toys): 31 batches were sampled, of which 4 batches were unqualified: 2 batches of labels and instructions failed.

There are 1 batches of products in the battery compartment or above without battery polarity, shape and nominal voltage marking; the other 1 batches are not related to battery safety instructions. It is easy to cause misoperation and danger. 2 batches of heat and abnormal work failed, mainly during the test period, the temperature rise of the toupable parts exceeded the standard value, which caused fire, scald or other hazards due to the increase of temperature.

(six) car child safety seat (sampling 17 batches, qualified 16 batches) is mainly the problem of identification and instruction manual.

In recent years, with the increasing number of private cars, the safety of minors has been increasingly concerned by parents and the society. This has stimulated the rapid development of child safety seats in China. All kinds of children's safety seats with various grades are flooding the market. This commodity has greatly increased the safety and comfort of minors while exposing many problems. For this reason, the Provincial Bureau of Commerce and industry has carried out dynamic tests and identification and manual inspection for children's safety seats. Through dynamic tests, all items, such as any part of the restraint system used to maintain children's riding position, should not be broken, the general requirements such as tripping, locking or displacement system, chest acceleration, abdominal invasive test and dummy movement should not meet the national standard requirements.However, problems were identified in the identification and manual inspection. Logo and instructions, although it does not directly affect the quality of products, but for the correct installation and use of child safety seats is very important. The wrong or missing information sign and instruction manual can easily lead consumers to be unable to install and use correctly. Once encountering a sudden traffic accident, they can not get the proper safety protection function, and there is a great hidden danger to children's personal health. If it is not well done, the "umbrella" will become a "fate maker".

Three, consumer warning: the purchase of children's products related matters needing attention

(1) consumption warning for buying and using children's clothing

1 check the logo:

Check whether there are Chinese labels on the products and their packages, whether there are product inspection certificates and quality grades, whether they indicate the manufacturer's name and address, product name, specification, type, product standard, safety category, fiber content, washing method and so on. Infant clothing logo should be specially marked "baby products".

2 look at texture:

Pay attention to the quality of children's clothing fabric and accessories. The best choice for infant clothing is all or most of the natural fibers. There should be no obvious fabric defects and stains on clothing.

3 security:

Children are not very good at protecting their own safety, so the safety of children's clothing is most important. There should not be any rope in the head and neck of children under 7 years of age. Other categories of belts and ropes should not be too long, so as to avoid causing accidents such as injury and entangling. The accessories used in children's clothing should be able to resist the tensile failure force of a certain intensity and prevent choking from children's swallowing. Attachments to children's clothing should not have sharp sharp edges and sharp edges. The durability labels for children's garments that are stitched on the body can be placed directly in contact with the skin.

4 smell:

Check for irritating smell or other odors. So as not to affect children's physical health due to excessive chemical substances.

(two) consumer warning for buying and using child trolley

1 consumers should purchase products with complete logo.

Products must have the required product marks and instructions, including product name, product type, product standard number, age and weight, safety warning, safe use method, assembly and assembly instructions, maintenance and maintenance, producer name and site information.

2 the safety quality should be the first consideration when choosing a cart product.

Consumers should choose from the regular channels the safety and quality of the cart products, and should choose the appropriate age cart products according to the children's physical intelligence characteristics.

3 when purchasing children's trolley, we should pay attention to the following points.

Product packaging should be marked: product name, age, manufacturer name and specific address, product execution standard number, etc. Secondly, pay attention to the old and new packaging, whether the seal is good, whether the sign is clear; for compulsory certification of children's car products, when choosing goods, we should also pay attention to the commodity must have "CCC" logo, 3C logo is generally stuck on the product fuselage or printed on the nameplate.

4, consumers should be good at protecting their own rights and interests, buy children's trolley in regular places, and pay attention to the sales vouchers for products.

When it is found that the trolley may be at risk of injury, it should actively respond to the relevant quality management departments in response to safety and quality issues in addition to safeguarding their own rights and interests.

(three) consumer warning for buying and using children's shoes

1 when buying, smell the shoes first.

If irritating odors are serious, be careful to buy them. Try to buy shoes with no smell or less odor.

2 when purchasing, first look at the packaging bags and upper materials, try to choose the logo (logo) complete products.

Next, look at the shoe numbers and shoe types marked on the shoes and packages, and see if they are consistent with their requirements.

3 soft and hard soles

When buying children's shoes, fold the soles with your hands. If it is easy to bend and no rebound, it indicates that the soles are too soft. If it is not easy to bend, it also indicates that the soles are too hard. It is best to choose elastic, shock absorbing, anti-skid and wearable bottom of beef tendon.

4 fabric comfort

The upper part of children's shoes is best cloth quality, because the foot has rich nerve and blood vessel network, wearing leather shoes will constrict the local nerve and blood vessels, affect the growth and development of toes and feet, and will also cause foot deformity seriously. Cloth shoes are light, breathable and comfortable to wear.

5, grasp the size of shoes.

When you try shoes, let your baby shoes wear well, then parents can insert a finger to show that the size of the shoes is just right.The shoes are too big and not fit for the feet, and the children's balance ability is limited, so it is easy to fall down, and it will also affect the children's posture and affect the bone development.

In addition, after purchasing goods, they should ask for invoices, retain their shopping vouchers, and effectively protect their legitimate rights and interests when they have quality problems.

(four) consumer warning for buying and using children's remote control toys

1 when consumers choose to purchase remote control toys, they choose to use infrared remote control or 2.4GHz toys.

2 purchase as far as possible the remote control toy products with the type approval code of radio transmitting equipment (CMIIT ID). The performance of such toys has been checked by relevant departments and accorded with the relevant regulations of the state.

3 try to choose remote control toys in the open area so as not to interfere with other radio equipment. Special remind consumers are not allowed to use remote control aircraft near important sites such as airports. If playing remote control aircraft at airports (especially with aerial function), it may affect the normal operation of airport radar, which will affect the normal communication between the aircraft and the tower, thus affecting the normal take-off and landing of the aircraft.

(five) consumer warning for the purchase of children's toys (non remote control).

One

Toy toys national standard GB 6675-2014 "toy safety" has been implemented in 2016.1.1, and some businesses are selling products with GB 6675-2003 standard. Although products manufactured or imported according to the GB6675-2003 standard before January 1, 2016 can be sold to June 30, 2017, consumers need to pay attention to and pay attention to the toys purchased when they are purchased according to the new standard.

Two

When shopping for toy products, safety and quality should be the first consideration. Consumers should choose toys that are safe and quality guaranteed from regular channels, and choose toys of appropriate age according to children's physical intelligence.

Three

When buying children's toys, we should pay attention to the following points: product packaging should be marked: product name, age, manufacturer's name and specific address, the implementation of the standard number of products; secondly, pay attention to the old and new packaging, whether the seal is good, whether the sign is clear; for compulsory certification of the 6 categories of toy products, when choosing goods, we should pay attention to the commodity must have "CCC" logo, 3C logo is generally pasted on the product fuselage or printed on the nameplate.

Four

Consumers should be good at protecting their own rights and interests, purchase children's toys in regular places, and pay attention to the sales vouchers for products. When a toy is found to be at risk of injury, it should take the initiative to respond to the quality management department in response to safety and quality issues in addition to safeguarding its own rights and interests.

(six) consumer warning for the purchase of child safety seats for cars

1, check the logo, look at the packaging.

The identification and instruction manual of the product are necessary information for the production of the products, including the specifications, performance and usage of the products, so as to guide the consumers to purchase and use them correctly. This is the responsibility of producers and distributors. It is the need to fight fraud and let consumers understand the need for consumption. Therefore, the use instructions of products are signs of the quality commitment of producers and distributors, reflecting the quality consciousness and management level of enterprises. Therefore, consumers can directly see the product instructions to judge the quality of products.

The product instructions can be used in the form of tag, label, package instruction, instruction manual and so on, and can be used together at one or more parts. The contents must include: the manufacturer's name and address, product name, specification and type, raw material composition and content, washing method, execution standard, quality qualification certificate and so on, and the manufacturer's name or trademark, installation method and durability label must be used. When purchasing, consumers can first identify the product's outer package, and the contents of the package are shown in a regular way. If the contents of the package are incomplete, non-standard, inaccurate and deliberately exaggerated, they must be carefully purchased. Special attention should be paid to products such as products without standard packaging or external packaging, but not indicating the address of production enterprises or enterprises, no product specifications and ingredients, no standard implementation, no durable labels, tag labels - durability labels - product packaging is inconsistent and product performance is exaggerated, so it is best not to purchase. In addition, if the product is rough and unclear, it is not suitable for purchase.

2, look at the appearance, look at the work.

At present, the children's safety seats on the market are different in scale, the price difference is big, and the difference between work and quality is large. The products with good quality have solid workmanship, smooth surface, no burrs, and large energy absorbing materials, soft and even cloth, fine texture, clear printing and uniform sewing. If the product skeleton is soft, plastic parts burr, energy absorbing materials are shoddy, cloth texture is hard, uneven, sparse texture and rough sewing, the quality is difficult to guarantee, and the safety coefficient is not up to the requirements.

3, smell odour and pick flowers.

The cloth covered on child safety seats belongs to textiles, and various finishing agents and auxiliaries should be used in printing and dyeing and finishing. If the processing technology is improper, residual chemical components will be damaged, which will cause harm to the human body. In addition to paying attention to the above purchasing skills, consumers can also smell "taste". If the product gives off the smell of stimulation, it is possible to have formaldehyde residue, so it is best not to buy it.

When choosing colors, we should choose a lighter shade. When choosing a darker color product, we can use a piece of cloth (wetting better) to rub repeatedly on the cloth. (if the printed cloth should be rubbed at the printing place), if the color is stained on the small cloth after friction, it means that the product is easy to fade and try not to buy.

4, we must strengthen our awareness of self-protection.

Consumer shopping can not be credulous advertising, for goods that do not understand, do not rush to buy. Shopping must obtain shopping invoices. In case of disputes, they should promptly complain to the consumers' Association, protect their rights and interests by legal means, and jointly supervise and regulate the market.

Jiangsu Bureau of Commerce and industry will, according to the specific circumstances of sampling inspection, require unqualified commodity operators to stop selling unqualified products on the basis of published information. The industrial and commercial organs under the jurisdiction shall check the unqualified commodities sold on the market in their respective jurisdictions and deal with the disqualified commodity operators according to law. To remind consumers that when buying goods, they should first choose reputable enterprise products; secondly, they should avoid buying "three noes" products; thirdly, they should carefully observe commodity labels, certificates, and know whether the relevant information is complete. In addition, good shopping tickets should be kept as an important voucher for consumer rights protection. If you find suspected fake and inferior commodities, please call the industry and Commerce Bureau for 12315 complaints and phone calls to protect your legitimate rights and interests.